Window film I Privacy screen - Ice crystals and snowflakes
£0.00
Available immediately, delivery time: 6-8 Days
Product number:
FE569879777
Product information "Window film I Privacy screen - Ice crystals and snowflakes"
Self-adhesive window film with wintry ice crystals and snowflakes. The portrait format motif is perfect for the winter season. It decorates your windows in an atmospheric way and also serves as a translucent privacy screen. Perfect for creating an atmospheric ambience for your guests at Christmas.
The quality film has the following features:
- Printed quality film for windows
- Translucent - frosted glass film
- Serves as privacy protection and window decoration
- UV-resistant when exposed to sunlight
- Film is self-adhesive
- Adheres to windows and other smooth surfaces
The self-adhesive privacy film is particularly suitable for windows. However, you can also apply the self-adhesive frosted glass film to other smooth surfaces. This can also be a mirror or a glass door. The window film is mainly used in bathrooms. However, it is generally suitable for any room. On the one hand, it serves as a privacy screen, but at the same time still lets enough light through.
Would you like a customised size?
No problem! Simply use our size configurator. You can enter your desired dimensions there.[TAB:Installation]Apply the film from top to bottom. Peel off a small piece of the backing film from the top and attach the film to the window or surface. Work your way a little at a time by pulling the backing film further down. Any bubbles can be smoothed out with a cloth or squeegee from the inside to the outside. Make sure that the film is applied straight from the start. If necessary, the film can be cut to size with a cutter knife or scissors before installation.Manufacturer: Pixblick e.K.
Address: Turmstraße 64 | 10551 Berlin | Germany | shop@pixblick.com
| Colours: | Blue |
|---|---|
| Format: | Portrait format |
| Rooms: | Bathroom, Kitchen, Living room |
| Size: | 40 x 70 cm (width x height), 60 x 105 cm (width x height), 80 x 140 cm (width x height), 100 x 175 cm (width x height) |
How to apply the film step by step
Begin installation by applying the film from top to bottom. First remove a small piece of the backing film in the upper area and position the film in the desired location on the window or surface. Then work your way downwards bit by bit by slowly peeling off the backing film and gradually pressing the adhesive surface into place.
If air bubbles form during this process, they can be easily wiped out from the centre outwards using a soft cloth or squeegee. Make sure to apply the film as straight as possible to achieve a clean end result. If necessary, you can cut the film to size with scissors or a cutter knife before applying it.
If air bubbles form during this process, they can be easily wiped out from the centre outwards using a soft cloth or squeegee. Make sure to apply the film as straight as possible to achieve a clean end result. If necessary, you can cut the film to size with scissors or a cutter knife before applying it.