Skip to main content Jump to search Skip to main navigation
Free shipping
Customised production
Secure payment with PayPal
Purchase on account

Retro photo wallpaper - 80s palm trees and sun in synthwave design

Product information "Retro photo wallpaper - 80s palm trees and sun in synthwave design"

High-quality illustrated motif in the synthwave style of the 80s on photo wallpaper. All 80s fans will get their money's worth with this retrowave design. A grid pattern on the floor, palm trees on the sides and a large sun in the centre in the evening mood. Purple and blue colours in combination with orange and red create that special 80s retro feeling. This is often referred to as vaporwave.
Create a futuristic wall design in the style of the 80s. Order either self-adhesive wallpaper or paste the wall wallpaper. Both types of wallpaper are made from high-quality non-woven material.
The motif is suitable for hallways, kitchens, bedrooms, living rooms, cafés, bars and other rooms.

Is it possible to order the motif in sizes other than the standard sizes?

Every motif in the Pixblick photo wallpaper shop can be ordered in customised sizes. Choose either the standard sizes, which for this motif start at 100 x 60 cm (width x height) and end at 450 x 270 cm (width x height). You can also order your photo wallpaper in customised sizes. Simply click on "Custom size" and you can enter your desired dimensions in the "Width" and "Height" fields.

Is the wallpaper supplied in several panels?

Yes! The wallpaper is supplied rolled up in several panels.

Can the wallpaper be removed at some point?

Unfortunately, it is sometimes necessary to part with a wallpaper. Either you want a change of wallpaper or you have to move house. In this case, Pixblick non-woven wallpapers can be removed in whole panels or in large pieces. This always depends on the wall. You don't need a scraper or wallpaper stripper.

Manufacturer: Pixblick e.K.

Address: Turmstraße 64 | 10551 Berlin | Germany | shop@pixblick.com

Colours: Blue, Orange, Purple, Violet
Format: Landscape format
Material: Non-woven (paste the wall wallpaper) premium quality, Self-adhesive premium fleece
Rooms: Bedroom, Cafe I Bar, Kitchen, Living room, Youth room
Size: 100 x 60 cm (width x height), 150 x 90 cm (width x height), 200 x 120 cm (width x height), 250 x 150 cm (width x height), 300 x 180 cm (width x height), 350 x 210 cm (width x height), 400 x 240 cm (width x height), 450 x 270 cm (width x height)
Self-adhesive wall mural (premium quality)
Self-adhesive wall mural

✓ High-quality non-woven wall mural

✓ Direct shipping from our print studio

✓ Self-adhesive premium wall mural

✓ Carefully quality-checked by our photographer

✓ High-resolution imagery with brilliant colors

✓ Free from plasticizers and PVC

✓ Lightfast and UV-resistant – no fading in sunlight

✓ No gaps between panels

✓ Dimensionally stable – no stretching or shrinking

✓ Seamless edge-to-edge application

✓ Durable material: scratch-, scrub- and tear-resistant

✓ Wall surface should be smooth, dry, and dust-free

✓ Easily removable without residue

✓ Delivered in individual wallpaper panels

✓ Supplied rolled in sturdy packaging

✓ Delivery without decoration or furniture

✓ Free shipping within the UK

Installation instructions

Wall mural installation – wall preparation

Remove any holes and irregularities from the wall. Ensure the surface is smooth.

Wall mural installation – Clean the wall with a cloth

Clean the wall with a dry cloth. Remove any dust and dirt.

Mark the panels using a spirit level and a pencil

Mark the strips vertically with a pencil.

Before applying the panels, unroll them on the floor first

Unroll all panels on the floor to let them settle. Check that the panels align perfectly.

Peel off the backing paper and apply the wall mural from top to bottom

Apply the wallpaper panels to the wall (ideally with two people) by peeling off the backing paper. Start each panel from the top.

Smoothing the panel with a pressure roller

Air bubbles can be smoothed outwards using a wallpaper pressure roller or a squeegee with a felt edge.

Apply the wall mural panels edge to edge

Apply the panels precisely edge to edge.

Press the entire wall mural again with the pressure roller

Work over the entire wallpaper with the wallpaper pressure roller.

Trim any excess with a craft knife

Excess material can be trimmed with a utility knife.

Non-woven wall mural (paste-the-wall)
Self-adhesive wall mural

✓ High-quality non-woven wall mural

✓ Premium non-woven wall mural with a matte finish

✓ Free from plasticisers and PVC

✓ Professional quality check by our photographer

✓ Direct shipping from our print studio

✓ Durable material: scratch-, scrub- and tear-resistant

✓ No shrinking while drying (dimensionally stable)

✓ No gaps between strips

✓ The wall mural can be applied edge to edge

✓ Installation with standard paste-the-wall adhesive

✓ The wall surface should ideally be smooth, dry and dust-free

✓ The wall mural can be removed without leaving residue

✓ Delivered in individual strips in sturdy packaging

✓ Supplied rolled in sturdy packaging

✓ Delivery without decoration or furniture

✓ Free delivery within the UK

Installation instructions

Repair any cracks and holes in the wall before installation

Remove any holes and irregularities from the wall. Ensure the surface is smooth.

Remove any dust from the wall before installation

Clean the wall with a dry cloth. Remove any dust and dirt.

Mark the strips using a spirit level

Mark the strips vertically with a pencil. Then lay the strips out on the floor and check that they align perfectly.

Non-woven wall mural (paste-the-wall) – apply paste for the first strip

Apply the paste to the first strip using a paste roller, extending slightly beyond the edge.

Apply the first strip from top to bottom

Apply the wallpaper strip, starting from the top. Smooth the wallpaper using a pressure roller or a squeegee with a felt edge.

NApply paste for the next strip

Then apply paste to the next wallpaper strip, extending slightly beyond the edge.

Apply the strips precisely edge to edge

Apply the strips precisely edge to edge.

Remove any excess paste

Any excess paste should be removed with a sponge.

Trim any excess with a craft knife

Any excess can be cut off with a Stanley knife.

Loading...
Files are being uploaded, please wait...